SELEZIONA LA TUA REGIONE E LINGUA

UNITED STATES
English
LATIN AMERICA
Español
Português
AUSTRALIA &
NEW ZEALAND

English
JAPAN
Japanese
ASIA PACIFIC
English

VICINO
SPOT

SPOT Trace

DISPOSITIVO DI TRACCIAMENTO SATELLITARE

Richiedi Assistenza Richiedi Assistenza
Documenti Documenti
Firmware Firmware
Video Video

FIRMWARE PIÙ RECENTE

Data di rilascio
Nov. 14, 2019
Versione del firmware
1.9
Aggiorna firmware >>

SPOT Trace Supporto

Hardware


DOMANDE E RISPOSTE

SPOT Trace Mounting and Installation

The orientation of the SPOT Trace when installed may have an impact on the performance and consistency of the device.  For the best reception, always mount or install the unit with the SPOT logo directed to the sky.  The internal satellite antenna is located beneath the logo. If using line power, ensure that the unit will be installed within proximity of your power source. You may install the reversible mounting bracket using the included: Double-sided industrial strength tape Adhesive grip pad Adhesive hook and loop tape.  Then, place the SPOT Trace in the mounting bracket. The device will transmit through fiberglass, fabric, and glass.  Reception may be inhibited due to hills, buildings, metal roofs, or other obstructions. We strongly recommend experimenting and testing your device in the desired installation location before semi-permanently installing.  ...

How do I replace the batteries in the SPOT Trace?

To replace the Energizer­® AAA Ultimate Lithium™ or Energizer® NiMH batteries installed in your SPOT Trace, please follow the steps below. With a Phillips-head screwdriver, unscrew the 4 enclosure screws keeping the two halves of the SPOT Trace together. Carefully separate the two halves of the SPOT Trace by evenly separating the two halves of the device.  If the two halves are separated unevenly it may result in damage. Remove the expired batteries and replace with new lithium or NiMH batteries Ensure batteries are oriented correctly. Combine the two halves of the Trace evenly and hold a firm grip at the center of the unit while screwing unit together An amber light will appear for approximately 5 seconds, then the LEDs will display the power on sequence – both the power and satellite LEDs will flash.   Common Issues The power LED is flashing or solid red after replacing the batteries Unscrew and separate the two halves of the SPOT Trace.  After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half. If you continue to receive red LED lights after repeated attempts, please contact SPOT Customer Relations for further assistance. Amber light will not turn off after replacing the batteries Unscrew and separate the two halves of the SPOT Trace.  After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half. If you continue to receive a solid amber LED light after repeated attempts, please contact SPOT Customer Relations for further assistance. ...

What is the estimated battery performance for the SPOT Trace?

...

Hai bisogno di ulteriore aiuto?


CONTATTI
Servizio in lingua inglese dal lunedi 7.00 al venerdi 23.00

Servizio in lingua francese, spagnola e portoghese, giorni della settimana, dalle 14.00 alle 23.00

EU - +353 1290 9505
Francia - +33 800 91 16 33
Olanda - +31 800 0900114
Norvegia - +47 800 25 172
Svezia - +46 20 88 15 59
UK - +44 808 189 6244

MY VOICE

My Voice è un servizio creato per darti modo di far ascoltare la tua voce.
Cosa aspetti? Facci conoscere la tua opinione per aiutarci a migliorare la tua esperienza SPOT. Saremo lieti di ascoltarti.

INVIA LE TUE OPINIONI QUI