SÉLECTIONNEZ VOTRE RÉGION ET VOTRE LANGUE

UNITED STATES
English
LATIN AMERICA
Español
Português
AUSTRALIA &
NEW ZEALAND

English
JAPAN
Japanese
ASIA PACIFIC
English

FERMER
SPOT

SPOT Trace

DISPOSITIF DE
SUIVI SATELLITE

Obtenir De L'aide Obtenir De L'aide
Documents Documents
Firmware Firmware
Vidéos Vidéos

DERNIER FIRMWARE

Date de publication
Nov. 14, 2019
Version du firmware
1.9
Mise à jour du firmware >>

SPOT Trace Assistance

Matériel


QUESTIONS ET RÉPONSES

SPOT Trace Mounting and Installation

The orientation of the SPOT Trace when installed may have an impact on the performance and consistency of the device.  For the best reception, always mount or install the unit with the SPOT logo directed to the sky.  The internal satellite antenna is located beneath the logo. If using line power, ensure that the unit will be installed within proximity of your power source. You may install the reversible mounting bracket using the included: Double-sided industrial strength tape Adhesive grip pad Adhesive hook and loop tape.  Then, place the SPOT Trace in the mounting bracket. The device will transmit through fiberglass, fabric, and glass.  Reception may be inhibited due to hills, buildings, metal roofs, or other obstructions. We strongly recommend experimenting and testing your device in the desired installation location before semi-permanently installing.  ...

How do I replace the batteries in the SPOT Trace?

To replace the Energizer­® AAA Ultimate Lithium™ or Energizer® NiMH batteries installed in your SPOT Trace, please follow the steps below. With a Phillips-head screwdriver, unscrew the 4 enclosure screws keeping the two halves of the SPOT Trace together. Carefully separate the two halves of the SPOT Trace by evenly separating the two halves of the device.  If the two halves are separated unevenly it may result in damage. Remove the expired batteries and replace with new lithium or NiMH batteries Ensure batteries are oriented correctly. Combine the two halves of the Trace evenly and hold a firm grip at the center of the unit while screwing unit together An amber light will appear for approximately 5 seconds, then the LEDs will display the power on sequence – both the power and satellite LEDs will flash.   Common Issues The power LED is flashing or solid red after replacing the batteries Unscrew and separate the two halves of the SPOT Trace.  After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half. If you continue to receive red LED lights after repeated attempts, please contact SPOT Customer Relations for further assistance. Amber light will not turn off after replacing the batteries Unscrew and separate the two halves of the SPOT Trace.  After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half. If you continue to receive a solid amber LED light after repeated attempts, please contact SPOT Customer Relations for further assistance. ...

Besoin d'aide supplémentaire?


NOUS CONTACTER
Service en Anglais: de lundi 7h à vendredi 23h

Service en français: lundi - vendredi, 14h-23h, jours fériés inclus

En raison de COVID-19, les temps d'attente peuvent être plus longs que d'ordinaire.

EU - +353 1290 9505
France - +33 800 91 16 33
Pays-Bas - +31 800 0900114
Norvège - +47 800 25 172
Suède - +46 20 88 15 59
Royaume -Uni - +44 808 189 6244

MY VOICE

Nous avons conçu My Voice pour vous permettre de faire entendre votre voix.
Alors n'hésitez pas à nous donner votre avis pour nous aider à améliorer votre expérience avec SPOT. Nous sommes à votre écoute.

DONNEZ VOTRE AVIS ICI