Soporte SPOT Trace

How do I replace the batteries in the SPOT Trace?

To replace the Energizer­® AAA Ultimate Lithium™ or Energizer® NiMH batteries installed in your SPOT Trace, please follow the steps below.

• With a Phillips-head screwdriver, unscrew the 4 enclosure screws keeping the two halves of the SPOT Trace together.
• Carefully separate the two halves of the SPOT Trace by evenly separating the two halves of the device.  If the two halves are separated unevenly it may result in damage.
• Remove the expired batteries and replace with new lithium or NiMH batteries
  • Ensure batteries are oriented correctly.
• Combine the two halves of the Trace evenly and hold a firm grip at the center of the unit while screwing unit together
• An amber light will appear for approximately 5 seconds, then the LEDs will display the power on sequence – both the power and satellite LEDs will flash.

• Unscrew and separate the two halves of the SPOT Trace.  After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half.
• If you continue to receive red LED lights after repeated attempts, please contact SPOT Customer Relations for further assistance.

• Unscrew and separate the two halves of the SPOT Trace.  After 10 seconds, recombine the halves ensuring that the contacts from the battery tray make a flush connection to the other half.
• If you continue to receive a solid amber LED light after repeated attempts, please contact SPOT Customer Relations for further assistance.